|
1. H. L. Chen, R. D. Chien, S. C. Chen, Int. Commun. Heat Mass Transf., 35, 991 (2008)
2. S. C. Chen, Y. W. Lin, R. D. Chien, H. M. Li, Adv. Polym. Technol., 27, 224 (2008)
3. S. W. Cha, J. D.Yoon, Polym-Plast Technol. Eng., 44, 795 (2005)
4. S. Semerdjiev, VEB Deutscher Verlag für Grundstoffindustrie, (1980)
5. A. K. Bledzki, H.Kirschling, G. Steinbichler, P. Egger, Trans. Tech. Publication, Zurich,
Switzerland, 257 (2005)
6. W. Michaeli, D. Opfermann, SPE ANTEC Tech. Papers, 64, 1290 (2006)
7. J. D. Yoon, S. K. Hing, J. H. Kim, S. W. Cha, Cellular Polym., 23, 39 (2004)
8. A. K. Bledzki, H. Kirschling, G. Steinbichler, P. Egger, J. Cell Plast., 40, 489 (2004)
9. S. C. Chen, P. S. Hsu, Y. W. Lin, Int. Polym. Process, 26, 275 (2011)
10. S. C. Chen, P. S. Hsu, S. S. Hwang, J. Appl. Polym. Sci., 1 (2012)
11. Guilong Wang, ”Research of thermal response simulation and mold structure optimization for rapid heat cycle molding processes, respectively with steam heating and electrical heating.” , MATERIAL AND DESIGN, 2010.
12. A.C. Liou, R.H. Chen, “Injection molding of polymer micro- and sub-micron structures with high-aspect ratios”, International Journal of Advanced Manufacturing Technology,Vol. 28, No. 11-12, pp. 1097-1103, 2006.
13. Donggang Yao and Byung Kim, “Development of Rapid Heating and Cooling Systems for Using Injection Molding Applications”, Polymer Engineering and Science,Vol. 42, No. 12, pp. 2471-2481, 2002.
14. D. Yao and B. Kim, “Development of Rapid Heating and CoolingSystem for Injection Molding Applications”, Polymer Engineeringand Science, Vol. 42, No. 12, pp. 2471-2481, 2001.
15. 行政院,“國家節能減碳總計畫”,民國99 年。
16. J. E. Martini, F. A. Waldman, N. P. Suh, SPE ANTEC Tech. Papers, 28, 674 (1982)
17. J. Xu,; D. J Pierick, Injection Molding Tech., 5, 152 (2001)
18. W. Gong, J. Gao, M. Jiang, L. He, J. Yu, J. Zhu, J. Appl. Polym. Sci., 122, 2907 (2011)
19. W. Kaewmesri, P. Rachtanapun, J. Pumchusak, J. Appl. Polym. Sci., 107, 63 (2008)
20. H. X. Huang, J. K Wang, J. Appl. Polym. Sci., 106, 505 (2007)
21. D. I. Goel, D. G. Baird, Polym. Eng. Sci., 35, 1167 (1995)
22. D. I. Collias, D. G. Baird, Polym. Eng. Sci., 35, 1167 (1995)
23. J. Lee, L. S. Turng, Polym. Eng. Sci., 50, 1281 (2010)
24. L. S. Turng, H. Khabas, Int. Polym. Process, 19, 77 (2004) |
|